FAQ

Can radon levels come back up after mitigation?

Direct answer

They can, for findable reasons: a stopped or worn fan, a sump cover left unsealed after pump work, settling that opens new cracks, or a renovation that changed the foundation or airflow. A working, maintained system holds its result.

More detail

Rebound is rarely mysterious. The fan is the first suspect, since it is the only moving part: a tripped breaker, a failed capacitor, or plain bearing death all read as level liquid on the manometer. Seals are second: sump covers removed for pump service and set back loose are a classic, and so is new slab penetration, a bathroom rough-in, a floor drain, a post footing, cut after the system was designed. Third is the house changing around the system: finishing the basement moves people closer to the source, air-sealing upstairs strengthens stack effect, a new furnace changes basement pressure. Karst ground adds a local wildcard, since soil-gas pathways can shift with water table and season, which is one more argument for the every-two-years retest habit rather than one triumphant post-install number. The response ladder is proportionate: check the gauge, check the seals, retest, and only then talk about adding suction points. The rebound FAQ covers the harder cases.

Authoritative sources

Ready to get started?

The inner Bluegrass sits on uranium-bearing limestone, and more than half of tested Fayette County homes have run elevated. Mon-Sat 8am-7pm.

Call (859) 780-8148Text us

Prefer to text? Open your texting app