FAQ

My house still tests high after mitigation. What now?

Direct answer

First verify the fan is actually pulling and every seal is intact, then retest under proper closed-house conditions. If the number is still high, the system needs diagnosis: more suction reach, a stronger fan, or an entry path the design missed.

More detail

Work the ladder in order, because the cheap explanations are the common ones. Confirm the manometer matches its startup mark and the fan runs. Walk the seals: sump cover, floor-wall joint, any slab cut made since install, crawl membrane edges if there is one. Check the test itself, since a device set beside a drafty walkout door or run during a windstorm misleads. If all that passes and a proper retest still reads at or above 4.0, the system has a reach problem, and diagnostics find it: smoke and pressure testing shows how far the suction field extends under the slab, and where it dies, the answers are a second suction point, a larger fan, or wall-cavity suction on block foundations where the wall is feeding the basement around the slab system. Stone-foundation houses in the region's older cores sometimes need this iteration; it is why performance language belongs in the proposal. Bring the before and after numbers to a repair and diagnosis visit, and see what the warranty covers.

Authoritative sources

Ready to get started?

The inner Bluegrass sits on uranium-bearing limestone, and more than half of tested Fayette County homes have run elevated. Mon-Sat 8am-7pm.

Call (859) 780-8148Text us

Prefer to text? Open your texting app