FAQ

My newer home has a radon pipe but no fan. Am I covered?

Direct answer

Partially at best. A passive pipe relies on natural draft, which the EPA rates well below fan-driven systems. Test the house; if it reads 4.0 pCi/L or higher, adding a fan to that pipe is usually the cheapest fix available.

More detail

Builders in the growth corridors around Georgetown, Nicholasville, and Richmond sometimes rough in radon-resistant features: gravel under the slab, sheeting, a sealed vent pipe run from below the slab through the roof, occasionally a junction box waiting in the attic. It is a genuine head start and a real economy, but it is not a mitigation system yet. Passive stacks move air by temperature difference alone, and the EPA's reduction tables put them far below active systems; a tight new house can test high with a passive pipe doing its gentle best. The sequence for a new-construction owner: test soon after move-in like any other house, and if the number calls for action, have the pipe inspected first, because a correctly built rough-in converts to a full active system for roughly $700 to $1,200, fan in the attic, gauge added, discharge checked, versus a from-scratch install. Verify the pipe actually terminates above the roof and originates below the slab; a stub that dead-ends in the attic has fooled people. Then retest. Details on conversions sit in the pricing guide.

Authoritative sources

Ready to get started?

The inner Bluegrass sits on uranium-bearing limestone, and more than half of tested Fayette County homes have run elevated. Mon-Sat 8am-7pm.

Call (859) 780-8148Text us

Prefer to text? Open your texting app